Bingo Plus

List of the catalog of this article:

• 1,Bingo PlusHow to clean the combustion chamber
• 2, How to clean up the carbon in the engine combustion chamber How to clean up the carbon in the engine cylinder
• 3, How to clean the accumulated carbon in the combustion chamber?
• 4, What is the function of cleaning the combustion chamber

How to clean the combustion chamber

1. Cleaning the combustion chamber: First, turn off the power supply and gas source of the gas water heater and let the water heater cool to room temperature. Open the front cover of the gas water heater, remove the burner cover, clean up dust, oil scale and other debris in the combustion chamber with a brush or brush, and be careful not to damage the burner and electrode.

2. Unplug the spark plug, pour the carburer cleaner into the combustion chamber, and wait for half an hour.

3. Hanging bottle cleaning. This method is also relatively common. Hanging the bottle is when the cleaning agent is discharged into the intake airway, the carbon is diluted and softened into a paste, and then burned and discharged from the cylinder.

4. The commonly used methods are: disassembly and cleaning, bottle cleaning, and fuel additives.

5. This method is also relatively common. Hanging the bottle is when the cleaning agent is discharged into the intake airway, the carbon is diluted and softened into a paste, and then burned and discharged from the cylinder. General cleaning objects include air intake channel, throttle valve, air intake valve, fuel injector, cylinder interior, etc., but the effect is not as direct and obvious as disassembly and cleaning.

How to clean up the carbon in the engine combustion chamber? How to clean up the carbon in the engine cylinder

1. There are the following three ways to remove the carbon in the car engine: additive cleaning: additive cleaning is to The cleaning agent is directly added to the fuel tank and mixed with the fuel. After the vehicle is started, the cleaning agent will enter the combustion chamber with the fuel. When the cleaning agent enters the combustion chamber, the carbon inside the engine will be cleaned to a certain extent.

2. Use high-quality fuel. Because the main components of carbon accumulation are wax and colloidal deposition in the fuel, the lower the colloidal content in the fuel, the better. But we can't change the quality of fuel, but we can choose not to add cheap fuel of unknown origin.Avoid driving at low speed for a long time. If necessary, you can pull the highway regularly.

3. Additive cleaning is to add the cleaning agent directly into the fuel tank and mix it with the fuel. When the vehicle starts, the cleaning agent will enter the combustion chamber with the fuel. When the cleaning agent enters the combustion chamber, the carbon inside the engine will be cleaned to a certain extent.

4. There are four commonly used methods of cleaning up carbon, which are "hanging bottles", "additives", "disassembly and washing" and "high-speed pulling".

5. The method of disassembly and cleaning is very direct and rough, but generally it needs to be sent to the 4s store. The disassembly of the engine is relatively complicated. No matter what part is disassembled and installed, it will more or less affect its performance. You need to ask a professional master to disassemble it.

6. Of course, the most effective way is to use an endoscope to go deep into the engine to see. Generally, it is recommended to use chemicals to clean the carbon of the engine. That is, the above chemicals work in the engine through the machine, bottle and other means that the chemical is sucked into the combustion chamber of the engine and dissolve the carbon through chemical action.

How to clean the accumulated carbon in the combustion chamber?

1. There are generally two cleaning methods for carbon accumulation in the combustion chamber: use compressed air gas dissolution method: the compressed air is introduced into the combustion chamber, and the airflow will blow the carbon ash out of the room to achieve the cleaning effect.

2. The method of cleaning carbon in the combustion chamber is as follows: Mechanical method: use a wire brush, scraper, bamboo or sand cloth to remove carbon and oil.

3. It can be cleaned by hanging the bottle, or with the large walnut sand, which can be cleaned cleanly. However, you must find a regular and experienced repair shop for cleaning with walnut sand.

4. Hanging bottle cleaning. This method is also relatively common. Hanging the bottle is when the cleaning agent is discharged into the intake airway, the carbon is diluted and softened into a paste, and then burned and discharged from the cylinder.

What is the function of cleaning the combustion chamber

1. [Pacific Automobile Network] The function of combustion chamber cleaning agent is to remove the carbon oil sludge on the surface of the combustion chamber of the combustion chamber, make the metal surface of the combustion chamber stronger and smoother, and reduce wear. The engine cleaner can remove and discharge some carbon, extending the service life of the engine.

2. It is necessary to clean the combustion chamber of the engine. Nowadays, many 4S stores and automobile repair shops have products and equipment for cleaning the combustion chamber.

3. The main effect is to remove the combustion chamber sediments such as the cylinder head, piston top, piston ring groove, etc., and eliminate the problems such as explosion shock, poor heat dissipation, insufficient cylinder pressure and the potential failure of the cylinder. However, the traditional water-based foam cleaner has insufficient cleaning power, which may also cause hidden dangers in oil emulsion and cylinders.

4. The engine of a car is relatively prone to carbon accumulation, so it is very necessary to clean the combustion chamber to accumulate carbon. The carbon accumulation in the combustion chamber will cause the compression ratio of the combustion chamber to become smaller, which will cause engine explosion. The explosion will affect power output and fuel economy, and severe explosions will even cause serious damage to the engine.