Hearthstone Wild Decks

List of the catalog of this article:

• 1,Hearthstone Wild Decks How to charge the car if it is out of power?
• 2, How to electricity a car
• 3, How to electricity when the car is out of power'
• 4, How to power the car when it is out of power Electricity
• 5, How to power a car
• 6. How to line the wire when the car battery is out of power

How to charge the car if it is out of power?

The methods of power-up when the car is out of power are to power with the help of other vehicles and external power supply.

The car can only be started by the battery to supply power to the starting motor. Once the battery is out of power, the car will not be able to start.At this time, you can directly ask the repair shop to send a new battery to replace it, or use a universal charger to charge the battery in place, or even directly use another car to charge the car to start.

There are two ways to power a car, one is to use other vehicles to power, and the other is to use an external power supply.

How to set up when the car is out of power: prepare a small DC charger and a wire.

The method of powering when the car battery is out of power is as follows: prepare two wiring and a car that can supply power. Remove the lock of the battery box to open the battery protective cover and leak the positive and negative poles of the battery.

car How to connect electricity

1. When connecting a car, you need to use a connecting wire. There are two types of connecting wires: red and black. The red wire is the positive pole wire, and the black wire is the negative wire. First, take out the red (positive pole) connecting one end to the positive pole of the battery of your vehicle, and the other end is connected to The positive pole of other vehicle batteries.

2. Use the battery to connect the batteries of the two cars. The positive pole is connected to the positive pole, and the negative pole is connected to the negative pole. Pay attention when connecting,Don't make a mistake between the positive and negative poles. The two clips should not be touched to avoid fire. Start the rescue vehicle and turn off all electrical equipment of the vehicle.

3. The method of charging is as follows: the front of the two cars are leaning against each other, and prepare two charging cables. Open the hood and connect the positive and negative electrodes of the two batteries with a charging cable. Red is connected to the positive pole and black is connected to the negative pole.

4. Wires: It is a necessary item for cars to build electricity. Don't take two wires at will.

5. The method of electricizing the car is as follows: take out the red (positive pole) wire, connect one end to the positive pole of the battery of your vehicle, and connect the other end to the positive pole of the battery of the other vehicle or the positive pole of the separate battery.

How to turn on the power when the car is out of power

The car is out of power, the method of power: prepare to build wires and emergency power supplies;First, turn off all the electrical equipment in the car, put the key in the off position, open the cabin cover to find the battery, and wire: positive to positive, first, negative, and then negative. After starting the vehicle, disassemble the negative first, and then disassemble the positive.

How to set up when the car is out of power: prepare a small DC charger and a wire.

There are two ways to power a car, one is to use other vehicles to power, and the other is to use an external power supply.

How to power up when the car is out of power

1. The method is as follows: connect the positive pole of the battery of the rescue vehicle with a connection cable. Connect the battery positive pole of the powerless vehicle on the other side. Another connecting line connects the negative pole of the rescue vehicle. The remaining end should not be connected to the negative pole of the battery of the battery of the battery-free vehicle, but should be connected to the iron parts of the engine body.Don't turn off the engine of the rescue vehicle.

2. When the car is connected to electricity, you need to use a wire. There are two types of wires: red and black. The red wire is the positive pole wire, and the black wire is the negative wire. First, take out the red (positive pole) wire, connect one end to the positive pole terminal of your vehicle battery, and the other end is connected to other vehicle storage. The positive pole of the battery.

3. The method of wiring the car when it is out of power: prepare a small DC charger and a pair of wires.

4. Wires: It is a necessary item for cars to build electricity. Don't take two wires at will.

5. When using a car to connect electricity, you need to use a wire. There are two types of wires: red and black. The red wire is the positive pole wire, and the black wire is the negative pole wire. First, take out the red (positive pole) Connect one end to the positive pole of your own vehicle battery, and connect the other end to the positive pole of other vehicle batteries.

How to connect the electricity to the car

1. When the car is connected to electricity, you need to use the wire. There are two types of wire: red and black. The red wire is the positive pole wire, and the black wire is the negative wire. First, take out the red (positive pole) wire and connect one of the ends. To the positive pole of your own vehicle battery, and the other end is connected to the positive pole of other vehicle batteries.

2. Use the battery to connect the batteries of the two cars. The positive pole is connected to the positive pole, and the negative pole is connected to the negative pole. When connecting, pay attention not to make a mistake between the positive and negative poles, and the two clips should not touch to avoid fire. Start the rescue vehicle and turn off all electrical equipment of the vehicle.

3. The method of charging is as follows: the front of the two cars are leaning against each other, and prepare two charging cables. Open the hood and connect the positive and negative electrodes of the two batteries with a charging cable. Red is connected to the positive pole and black is connected to the negative pole.

4. The owner first needs to prepare the car wiring, generally red and black wiring, red is the positive pole wiring, and black is the negative pole wiring. Connect the red wire to one end to the junction pole of the positive pole of your vehicle battery, and connect the other end to the junction pole of the rescue vehicle.

How to wire the car battery is out of power

1. How to power the car battery: The front of the two cars are close to each other, and prepare two charging cables. Open the hood and connect the positive and negative electrodes of the two batteries with a charging cable. Red is connected to the positive pole and black is connected to the negative pole.

2. Open the engine hatch cover. If the battery has a protective cover, you need to remove the protective cover to reveal the positive and negative poles of the battery. Pay attention to distinguish the positive and negative poles of the battery. If you can't distinguish them, you must not start to charge. Take a connection cable, one end is connected to the positive pole of the battery without power, and the other end is connected to the positive pole of the battery.

3. Let's take a look at the correct way to wire car batteries. First, take out a cable, one end is connected to the positive pole of the battery of the battery of the battery, and the other end is connected to the positive pole of the battery of the charging car.

4. Be sure to turn off the engine before wiring. When the battery is out of power, do not try to ignite it over and over again, which will cause the battery that is already out of power to run out of power. Take out your own wiring or take one of the positive and negative poles of the wiring from other cars.

5. Wiring method when the car battery is out of power: when operating, bring the two vehicles close to each other until the span cable is enough to connect the positive and negative poles of the two batteries.