DigiPlus stock

List of the table of contents of this article:

• 1,DigiPlus stock Do not reinstall the system to replace the computer system disk (hardware)
• 2, How to transfer the system from the old hard disk to the new hard disk
• 3, How to replace the system disk of the computer without affecting other files?
• 4, Lenovo thinkpad How to install the system disk after replacing the new hard disk on the notebook

Replace the computer system disk (hardware) without reinstalling the system

Right-click - update the driver - select "from the list or formulate Location" - Next - "Don't search for my own choice" - Next - Select "StandardPC" and then confirm, the system will prompt you to restart the computer, select "No", then exit and shut down.

Install the hard disk that needs to be replaced in the chassis. Pay attention to the jumper port, the first hard disk jumper Master (main disk), and the hard disk that needs to be replaced is the jump Slave (slave disk).

You can make a USB disk startup tool for your computer first, clone the system with ghost, and clone it with a new hard disk. However, friendly reminder, if it is time to reinstall or not, there will always be some problems with this system, and there is basically no solution to this problem except for reinstalling.

Although only the hard disk has been replaced and other hardware has not been replaced, the system is installed on the C partition of the hard disk. If the hard disk is replaced, it means that the computer has no operating system, so the system must be reinstalled before the computer can be used.

The first step is to set the light start: the so-called light start,It means that the computer first reads the optical drive when it starts up. In this way, if there is a CD with an optical start function in the optical drive, it can be read out before the hard disk starts (for example, when installing the system from the CD-ROM).

How to transfer the system from the old hard disk to the new hard disk

1. Right-click My Computer and select Manage, select Disk Management in the pop-up window, and then initialize (format) the new hard disk. In the formatting window, please select the NTFS file system and check to perform quick formatting.

2. Right-click "My Computer" and select "Manage", select "Disk Management" in the pop-up window, and then initialize (format) the new hard disk. In the formatting window, please select the NTFS file system and check "Execute Quick Formatting". Install TuxBoot and CloneZilla software.

3. Search for the answer. I want to ask a question. Baidu knows the prompt information and knows that the baby can't find the question_! The problem may have been invalidated.

4. Search DiskGenius on Baidu and click to enter the first link. Click the download button at the top of the page to enter the download interface. Choose the version that suits you and click the Download Now button. Open the downloaded software, click the tool option above the software, and click the clone disk option in the submenu.

5. Baidu Search Partition Assistant Download, click to download now. After opening the software download, click to migrate the system to the solid-state disk. In the open solid-state disk migration system, click Next. In the Select Disk Space window, left-click the unallocated space of disk 2 and click Next.

How to replace the system disk of the computer without affecting other files?

1. Reinstall the system and install it on the C disk by default. During the installation process, choose to format only the C disk, and other hard disks do not move. This installation method only emptys the C disk, and the data of other hard disks still exists and will not be lost. During the system installation process, select all formatting and repartition.

2. Search for answers. I want to ask a question. Baidu knows the prompt message and knows that the baby can't find the question_! The problem may have been invalidated.

3. When you reinstall the system, only format the system disk, that is, the C disk, or overwrite the installation system, and do not operate on other disks. In this way, the files on other disks will be retained.

4. Otherwise, other disk symbols will be done), then select the gho system file, select fast, and select yes to wait for the system to automatically reinstall.X0dx0ax0dx0a [Notes] When ghost is a system, do not select Local-Disk, which means reinstalling the entire hard disk.

5. If you reinstall the system and install it on the c disk, the files on other disks will not be affected by default, as long as it does not involve deleting or re-partitioning in the middle. However, it is still recommended that you back up some important data before reinstalling the system. You can use Xiaobai's one-click reinstallation system to reinstall online or USB flash drive.

6. How to replace the system disk: On the Windows 10 system desktop, we right-click the computer icon on the desktop and select the "Management" menu item in the pop-up menu. In the open computer management window, we click the "Disk Management" menu item in "Storage".

How to install the system disk after replacing the new hard disk on the Lenovo thinkpad notebook

The first item is to enter the system IOS image file just decompressed, to so Find the installation file install.win under the urces folder. The second option to boot must be the C disk of the solid-state drive, but note that it is not the C disk under your mechanical hard disk system, but the first partition disk. The third item is also to choose the C disk of the solid-state drive.

Close the partition tool, (reopen the fastest installation GHOST) In the installation tool, keep the default settings, select the wingho file in the USB disk for the file path, click the installation location, default C disk (the first local disk just recorded), and then click OK.Just wait for the system to be reinstalled.

Insert the made u boot disk into the USB interface of the notebook. When the boot screen appears, quickly press the notebook startup shortcut key f11 or esc key, and then select the USB boot item and press the Enter key. This is the first step of the USB disk installation system.

In the existing system, use the hard disk installation tool to extract the installation source to the old hard disk, and directly deploy the system to the new hard disk. If it is Ghost, it is easier to install the system, and directly restore Ghost64 or Ghost32 to the new hard disk.